Free Tire Air Pressure Check Process
If you are looking for an easy and free tire pressure check process, simply follow these steps to avoid unnecessary costly pressure checks and prevent premature tire wear.
However, if you don’t already own a tire pressure gauge, you will need to purchase one. The one below is super affordable and so easy to use.
Keep money in your hand. Not in your heart.Tweet
Car tires should always be properly inflated to ensure the best ride quality, tire wear, and safety. However, when inflating your tires if one is significantly lower, then it’s time to look for a tire leak.
In addition, it’s always good practice to measure tire tread depth while inflating your tires. After that, check the tire DOT to ensure all tires are still safe.
Free Tire Air Pressure Check Step by Step
Time needed: 5 minutes.
Free tire pressure check step by step.
- Find the Recommended Tire Air Pressure for Your Vehicle.
Two places to look.
Driver’s side door jam. This sticker will tell you the recommended “cold inflation pressure” (CIP).
Second place, your vehicle’s owner’s manual; usually located in a car or truck glove box.
Additionally, never follow the maximum pressure on the tire’s sidewall, it’s specific for what the tire recommends, not what your vehicle calls for.
- Always Check Your Tires PSI Before Driving on Them.
When checking your tires air pressure using our chart, it is best to do so when the tire is “cold”.
As a result, this regular check you will increase your tires life-span, vehicle gas mileage, and decrease tire wear.
- Get Out Your Tire Pressure Gauge.
The best tire pressure gauge allows you to test PSI with ease. Furthermore, all tires are rated for specific loads at a certain pressure.
- Unscrew the Valve Stem Cap on the Desired Tire.
A valve stem cap is important when it comes to the overall health of your tire and TPMS sensor.
It keeps dirt, moisture, and small debris from entering into your tire.
- Attach the Tire Pressure Gauge to the Valve Stem.
It is important to make sure you create a secure connection. For example, the connection should be nearly silent.
- Screw the Valve Stem Cap Back On.
Above all, if water gets into the valve stem and freezes inside the tire, it could cause a flat.
- Inflate or Deflate Your Tires, If Needed.
Finally, using a portable tire inflator fill your tire to the correct PSI if needed.
In conclusion, you should always check your tire pressure for over or under inflation issues. Similarly, incorrect PSI in your tire causes premature wear.
Additionally, unless your tire is visibly flat, do not ever judge tire inflation just by looking at it. To properly check your tires PSI, you have to use a tire pressure gauge to get the correct pounds per square inch reading.
Common Question(s) About Tire Pressure Checks
Frequent PSI checks and inflations can save you lot’s of time and money. So, check them often.
In addition to premature wear, incorrect tire pressure will cause decreased gas mileage and future vehicle problems.